Printmaking can be messy and take up a lot of space, but with a little planning, you can easily print at home.
When you start your printmaking journey, you might confine yourself to a quiet corner of a room where you can work undisturbed (read Finding Space at Home for Printmaking) but as your equipment takes up more space, you might need to set up a home printmaking studio. Maybe you’re lucky enough to have an art & craft room that needs a bit of re-organisation, a spare bedroom or a shed in the garden. Whichever position you’re in, read our tips for turning your space into a home printmaking studio that’s easy and fun to work in.
DIVIDE YOUR PRINTMAKING STUDIO INTO ZONES
Take a good look at the space you’re going to use for printing. It doesn’t matter how big it is, the same principles apply. Divide your printing space into four zones:
STORAGE | PREPARATION | PRINTING | DRYING
Often these spaces can double up so that you might design and cut your stencil on the same table that you use for printing. The important thing is to clear up between each process and always work in a clean and clear space.
It’s easier to work in a well organised printing space than a disorganised mess.
1 EFFICIENT STORAGE MAKES PRINTMAKING EASIER
Use a mix of cupboards, shelves, hooks, pegboard, trolleys and boxes makes it easy to store and find your printmaking tools and equipment.
Inks should be stored upright, out of direct sunshine. Make sure the lids are screwed on properly so that the inks don’t dry out.
Hang rollers from a hook or stand handle end down in a container. Don’t leave the rubber resting on anything as it may damage the surface and make sure they’re dry before you store them.
Protect the rubber strip of squeegees by storing them flat or upended. Alternatively, screw an eye hook into one end and hang them from a peg.
Stand or stack screens face to face and back to back, making sure they can’t be damaged by sharp objects or heavy items sitting on top of them.
Paper and fabric should be stored somewhere dry and clean, out of direct light. Make sure you know where your finished prints are stored so that you can easily find them eg in a filing cabinet. Don’t spend hours printing your masterpiece and then lose it!
Keep sharp tools such as lino cutting tools in the box they came in, in a fabric roll or upright in a stand. Make sure the blades of knives are retracted or covered.
Store inks, solvents and sharp blades safely; blades should be covered and all should be kept away from children.
2 MAKE YOUR PRINTMAKING PREPARATION AREA SAFE AND COMFORTABLE
Each printmaking technique has its own preparation requirements, so although you may be cutting out stencils for screen printing or etching Perspex sheets for drypoint, the basic requirements are the same.
Choose a sturdy desk, workbench or table at a height that’s comfortable for you, depending on whether you prefer to stand or sit. Protect your work surface with a cutting mat if you’re using sharp implements. Good lighting is essential.
3 ARRANGE YOUR PRINTMAKING AREA TO SUIT YOUR WORKFLOW
Again, different printing methods have different requirements, but you will need large, flat table or workbench that’s the correct height, with good lighting and ventilation. Lay a yoga mat or stack of magazines on your worktable if you need a softer surface for printing.
Remove anything that you don’t need and make sure the surface is clean.
Organise your printing area according to your workflow. You may want to have your clean paper on the left, your printing plate in the middle and your inks on the right, depending on how you work. Leave room to set down your finished print.
Plan where to lay down inky palette knives, rollers and tubes of ink.
How will you keep you and your equipment clean while you’re working? Do you need a box of wet wipes or paper towels? Will a bowl of water be sufficient or do you need to be close to a sink? What facilities do you need to clean up at the end of a session?
4 MAKE ROOM IN YOUR PRINT STUDIO TO EFFICIENTLY DRY YOUR PRINTS
Your drying area should be warm, dry and clean with enough room to keep each print separate so that they don’t stick together.
Set your prints to dry away from the print area to avoid accidental splashes and spillages.
Dry your prints flat on a table, the floor (not where you might tread on them) or on a stack of cooling racks used for baking.
If you prefer to hang your prints to dry, use clothes pegs or bulldog clips to suspend them from a drying rail or washing line.
Commercial drying racks are expensive but there are plenty of DIY alternatives on Pinterest.
Printed fabric can be pegged outside on a dry day.
The printmaking workshops at Slamseys run most Friday mornings during term time, with additional Saturday morning and summer holidays sessions.We specialise in printmaking workshops and short courses, including Fabric Printing, Drypoint, Linocut, Monoprinting and Screen-Printing. Our print studio is in a beautiful renovated barn in Essex, just an hour from London with free parking on site, a tranquil space to relax and be inspired.
SIGN UP TO THE SLAMSEYS NEWSLETTER
Sign up to the Slamseys Newsletter to receive occasional newsletters and to read our E-Book “How to Find Creative Inspiration”